Advertisement
member of Group
ENGINE PART - ELECTRIC MOTOR ATTACHMENT
Engine part: Fit the electric motor holder (11) into the fuselage part (5) so that the Print Beat logo is properly
legible, then adjust correct setting of the motor holder by insertion or removing according to the size of your
electric motor (then fix it by Super Glue).
Engine model: Install 9x engine cylinder (12) to part (8), then insert the engine cooling ring (10) – now it is the
right moment to install the electronic parts (regulator and electric motor). Then fix the assembly by the screw to
the fuselage part (5) and it remains to cover battery opening by the cover (9).
Propeller spinner: Put the propeller onto the mounting disc and insert the spinner (60), then put a nut into the
part (62) – the propeller unit is complete.
Note: You can make a choice of two used sizes of the mounting disc.
Congratulation if you finished this part of the model assembly and you have the fuselage complete. Now you
must still assemble the wing parts.
13
Advertisement
