Advertisement
MEDUSA DESKTOP CARE GUIDE
This introductory booklet will help you install and setup the aquarium. This
guide will also introduce you to general maintenance and jellyfish care.
Also included are some troubleshooting tips and FAQ's.
Thank you once again for choosing the Medusa Desktop Aquarium.
INSTALLATION
1. Choose the right location: The aquarium when filled with salt water will weigh over 60KG.
Choose a suitable surface to set up the aquarium that can hold the weight of the entire
system. The Aquarium should be set up out of direct sunlight. Be sure to position the tank
near an electrical supply point.
2. Un-package your aquarium and parts supplied: Your aquarium
will be complete with the following parts.
-
Medusa Desktop Aquarium
-
RGB Lighting & Power supply
-
-
-
-
Pipe & Stop valve (Pre-installed)
3. Add biological balls: The Balls will need to go into the first chamber at the rear of the
aquarium. (Facing the front of the aquarium, chamber on the far left).
Biological Balls
Filter floss
Pump
Advertisement
