One Drop Owner's Manual page 40

ing method:
a. Wipe up and down 3 times.
b. Wipe left and right 3 times.
c. Avoid getting disinfectant inside the One Drop Test Strip
port.
[2] With a new disinfecting wipe, disinfect your One Drop Me-
ter and One Drop Lancing Device using the disinfecting wipe
listed in the table above and follow the instructions below.
In addition, follow the instructions on the disinfecting wipe
container label for safe handling of the wipes.
[3] Wipe each side of your One Drop Meter and One Drop
Lancing Device with moderate pressure 3 times using the
following method:
a. Wipe up and down 3 times.
b. Wipe left and right 3 times.
c. Avoid getting disinfectant inside the One Drop Test Strip
port.
[4] After 2 minutes of contact time, let air dry.
38