One Drop Owner's Manual page 27

Pull the Lancet Cover Off: Hold the lancet firmly in place with
one hand and use your other hand to pull off the lancet cover.
Keep the lancet cover. It should be used when discarding your
used lancet.
Replace Lancing Device Cap: Replace the lancing device cap
until it snaps into place. Be careful not to touch the exposed
needle on the lancet.
Set the Lancing Level: The One Drop Lancing Device offers
five depth settings.
Slide the depth adjustment slider to the desired setting.
If you have never lanced before, it is recom-
mended that you start with slider in the
middle position. Slide toward the minus "-"
symbol to decrease depth setting.
Slide toward the plus "+" symbol to increase
the depth setting.
Cock the Handle: Pull the cocking handle out until it clicks.
You may have already cocked the handle while inserting the
lancet, this is OK.
The lancing device is now ready for use.
25