Advertisement
Feed the rod thru the top of the net. Start
inserting the rod at each corner. Once all the
fiber glass rod are connected and the zipper
are in position, secure the rods with the black
electrical tap.
Connect all the segments of the rod together
so it's secure. Tape at least 3 inches on each
side of the connector. Tape back and forth
about 4 – 5 layers. Make sure all the
sections with a silver fitting are secure and
taped. Even the silver fittings in the middle of
the fiberglass rod. Not having enough tape
will allow too much play on the rod and the
rod will drop when the kids jump.
When
finish taping you should finish almost all of
the roll of tape. If you have a lot left that
means you did not use enough tape.
Hang the net into the black cups on top of
the trampoline.
Secure the net by clipping the straps on the
bottom on net to V ring of mat below the
frame.
The trampoline will flip and fly with wind, we
recommend you buy an anchor kit for it.
Advertisement
