Advertisement
Lay all the spring pads as shown on the diagram.
There will be either Velcro strap or cloth loops. Loop the closest
springs thru the loop as shown here. Some of the spring pads will
have loops on both side. These spring pads are reversible and you
should flip them every few months to keep them clean.
You should use uv protectant to keep you spring pad from UV ray and
sun exposure. If you live in an extremely hot area we recommend
you bring in the soft parts (mat, pad, net) during the hot months as
the extreme weather will shorten the lifespan of these parts.
Installing the net
Connect the 2 net Enclosure
poles. Part 18 (square bottom)
and part
19. (Screw part 26)
There will be 4 square bottom
post that will either be labels
with a corner sticker or painted
yellow. These 4 post will be for
the corner of the trampoline.
Very important: Each end of part
19 will have a hole to screw into.
The part that connects to part 18
is the end with the single hole.
The end with the double hole
will be for the net cap later on.
Sleeve the net enclosure Pole
with part 23.
Make sure the
black strap is on the rounded
side of the pole and not square
Then pull the sleeve all the way
to cover the entire foam of the
pole
Install the black cap to the top
with part 17, 30 and 28
If you do not have 2 holes on
this side of your net enclosure
pole that mean you connected
the poles the wrong side.
Advertisement
