Dismantling - Vetter SmartTarget ST-2A-GL-01 Operating Instructions Manual

Alternative position
for the SmartSupply
4.2

Dismantling

Video instructions for correct dismantling of the SmartTarget fork back can be found under the following link.
https://www.smartfork.com/en/support/operating-instructions-smarttarget
42
6. Screw the SmartSupply to the fork back.
Use the corresponding holes.
7. Connect the plug-in connections again.
8. Mount the SmartTarget fork back and check compatibility with the fork carrier!
9. Insert the battery.
SmartTarget V.01/2021