Electrical Wiring - FACTO ECH102 Manual

INSTALLATION INSTRUCTIONS
REMOVING THE UNIT FROM THE WALL BRACKET (Fig.C)
1.Pull the upper part of the unit toward you to disengage the hooks.
2.Put the unit up and then pull the unit off the lower hooks.
This heater must be controlled by a thermostat. Please refer to thermostat installation
instructions for connection.
This unit must be connected by a certified electrician. Connect the bare wire
(ground) to the green screw. Connect wires from the electric box to the unit's supply
leads.
This product must be connected by a qualified electrician, according to the electrical
and building codes effective in your region.
Fig C

ELECTRICAL WIRING

6
L1
GROUNDING
L2