Specifications; Technical Drawings - FACTO ECH102 Manual

This convection heater is intended for permanent wall-mounting with the provided
brackets, which must be operated with a line voltage thermostat. (The line voltage
thermostat is not provided with the heater.)
The heater has a thermal cut-off protection. If the thermal cut-off protection trips, switch
off the power. The unit should reset automatically after 10 minutes. If the thermal cut-off
protection trips again, determine the reason for overheating.
68125112
Model
ECH102
Volts 240(CD1)V AC
Watts 1500 W
Height 17.52" (44.5 cm)
Width 28.65" (72.5 cm)
Depth 4.54" (11.5 cm)

SPECIFICATIONS

TECHNICAL DRAWING
4
1.34'' (34 mm)
0.95'' (24 mm)
KO O 0.04'' (O 22 mm)
ELECTRICAL INLET
1.19'' (30 mm)
3.35'' (85 mm)