Changing Access To Check_Mk Agents - CheckMK rack1 Mark III Manual

Check_MK rack1 Mark III - Manual 18 / 61

7.9 Changing access to Check_MK agents

A Check_MK agent is installed on the device and can only be queried by the device itself in the basic
setting. You can use it to create an instance on the device and directly add the device to the monitoring.
It is also possible to make the Check_MK agent accessible from another device, meaning the device can
also be monitored by another Check_MK system (e.g. in a distributed environment of a central server).
For this purpose, you can configure a list of IP addresses that are allowed to contact the Check_MK
agent.
©Copyright Mathias Kettner GmbH 2018 mathias-kettner.de