Larscom ACST-1500B Series Installation And Operation Manual page 157

Chapter 6
Configuration Procedures
3. If Access-T processes a TABS command, Access-T activates the
4. If Access-T prompts for a password, you can key-in one of the following:
5. Access-T regains its carrier (DCD) and invokes protocol search mode
As long as Access-T is not currently receiving a SLIP/PPP packet, you can
always return to the Terminal/TABS Interface by sending a TABS command or
keying-in the escape sequence "$USERMODE$". (You must use all capital let-
ters.You need not press the Enter key.)
6-32
b. a valid TABS command is processed or the user keys-in an escape
sequence to return to the Terminal/TABS Interface; or
c. modem connection is lost.
TABS/Terminal Interface. The user menu screen appears.
•
PASSWORD (invokes Terminal/TABS Interface).
•
PASSWORD:SLIP (invokes SLIP Interface).
•
PASSWORD:PPP (invokes PPP interface).
Note: Passwords are not equivalent to the authentica-
tion protocol.
(if passwords are disabled) or displays the password prompt (if
passwords are enabled).
ACST-0351-005
June 1996