Yamaha PSR-48 Authorized Product Manual page 39

eradicate a mistake or simply
eliminate an unwanted instrument.
First, make sure that the instrument
to be cancelled is in the group
selected by the variation buttons.
Then, while holding the CANCEL key
key
(the highest on the PSR-48
keyboard), press the percussion pad
corresponding to the instrument you
want to cancel. The selected
instrument should now be cleared
from the pattern.
6. If You Want to Add Accented Beats
Specified beats of your pattern can
be accented simply by pressing the
accent key (the second from
highest key on the PSR-48 keyboard
– with the ">" mark above it) at the
appropriate time. To accent the third
beat of the first measure, for
example, simply press the accent key
on the third beat of the first measure.
All instruments on the selected beat
will be accented. Accents cannot be
cancelled individually, so it is
necessary to cancel the accented
instrument and then enter the part
again with only the desired accents.
7. Stop Programming
Press the STOP button
rhythm pattern is complete and you
want to stop programming.
* Try writing the following rhythm patterns:
37
when your