2.1 CABINET PREPARATION
FOR OPERATION
Door Seal
Hinge doors . Check to ensure the door
torque is capable of closing the door
automatically. Open the door 45 degrees
and relase it , the door should close and
seal.
To adjust the torque , place a wrench on
each of the 2 nuts located on the botton
hinge. Hold the top wrench firmly and lose
the botton nut . Torque is increased or
decrease by rotating the top nut . After
adjustment has been made, Tighten the
botton nut.
Lamps
This merchandiser does not have Lighting
switch, Interior lamps are eqipped with a
plastic shield , be
installed properly.
Exterior lamp
Interiorlamp
SERIES
MERCHANDISERS
MEDIUMTEMPERATURE
sure the shield is
3.1 DIMENSION
W
H
W
H
PB2402474A
D
D