Side - Humminbird 788c Operation Manual

Side sets which transducer beam from the WideSide® Transducer will be shown
in the WideSide® View.
A WideSide® transducer must be connected to the Fishing System. The Side
menu option is available when Transducer Select is set to WideSide® (see Sonar
Menu Tab: Transducer Select) and can only be accessed from the Sonar X-Press
menu in the WideSide® view.
NOTE: The Side setting requires the purchase of the WideSide® transducer. You can
visit our website at www.humminbird.com to order this accessory online or contact
our Customer Resource Center at 1-800-633-1468.
To adjust the Side:
1. Make sure User Mode is set to Advanced and that WideSide® is
selected under the Sonar Menu Tab: Transducer Select setting.
2. From the WideSide® View, press the MENU key once to access the
Sonar X-Press™ Menu.
3. Highlight Side, and press the LEFT or RIGHT Cursor keys to change the
Side setting. (L [Left], Both, R [Right], Default = Both).

Side

(WideSide® transducer: WideSide® view only)
81 Sonar X-Press™ Menu
™