Advertisement
Quick Links
WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE SUNSAFE GRANDSTAND.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
PART No.
PART NAME
SSG1 A/B/C/D
MAIN FRAMES
SSG2
REAR SHELTER POST
SSG3
FRONT SHELTER POST
SSG4
UPPER SHELTER BEAM
PART No.
FASTENER DESCRIPTION
SSG13
M6x25mm. HEX. HEAD BOLT
SSG14
M6 LOCKNUT
SSG15
M10x38mm. CUP HEAD BOLT
SSG16
M10 WASHER
SUNSAFE GRANDSTAND
(Code No: SELG4T4R)
QTY
PART No.
PART NAME
4
SSG5
LOWER SHELTER BEAM
2
SSG6
SHELTER TRUSS
2
SSG7
BOTTOM CROSSBAR
4
SSG8
BACK REST PLANK
QTY
PART No.
FASTENER DESCRIPTION
120
SSG17
M10 LOCKNUT
120
SSG18
M12x90mm. HEX. HEAD BOLT
4
SSG19
M12x115mm. HEX. HEAD BOLT
4
SSG20
M12x150 mm. HEX. HEAD BOLT
QTY
PART No.
2
SSG9
SEATING PLANK
2
SSG10
REAR BACK REST FLAT BAR
2
SSG11
REAR GRANDSTAND TRUSS
1
SSG12
ROOFING PIECE
QTY
PART No.
FASTENER DESCRIPTION
4
SSG21
M12 LOCKNUT
32
SSG22
M12 WASHER
12
SSG23
ROOFING—SELF TAPED SCREWS
4
PART NAME
QTY
7
1
6
7
QTY
48
96
116
1
Advertisement
Summary of Contents for felton industries SELG4T4R
- Page 1 This activity requires two o more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground. SUNSAFE GRANDSTAND (Code No: SELG4T4R) PART No. PART NAME PART No.
- Page 2 WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE SUNSAFE GRANDSTAND. Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling process for flexibility in lining up components.
- Page 3 [SSGS9x2] [SSGS01A] [SSGS01B] [SSGS14x4] [SSGS01C] [SSGS13x4] [SSGS01B] A. Have the two external frames [SSG1A/D] in place, lugs facing inwards. Attach them to the back and front seat planks [SSGS09], with hex head bolts [SSGS13] and lock nuts [SSG14]— finger tighten. B.
- Page 4 [SSGS21x8] [SSGS22x8] [SSGS22x8] [SSGS08] [SSGS18x8] [SSGS14x4] [SSGS11x6] [SSGS13x4] [SSGS15X4] A. Attach the crossbars [SSGS11] to the back of the main frames [SSGS1A/B/ [SSGS10X1] C/D], with hex head bolts [SSGS18], [SSGS16X4] lock nuts [SSG121] and washers [SSGS17X4] [SSGS22]— finger tighten. B. Have the Back rest plank [SSGS08] in place and secure it to the main frames, by using hex head bolts [SSGS13], lock nuts [SSG14]—...
- Page 5 [SSGS21x1] [SSGS06x2] [SSGS22x2] [SSGS20x1] [SSGS19x1] [SSGS22x2] [SSGS22X1] [SSGS21x1] [SSGS22x2] [SSGS21X4] [SSGS19x1] B. Attach the 2 lower shelter beams [SSGS05] onto the back and front shelter posts [SSGS2/3], with hex head bolts [SSGS19], lock nuts A. Fix the 2 shelter trusses [SSGS06] on [SSG21] and washers [SSGS22]—...
- Page 6 [SG12x7] [SG23x116] [SG04x4] A. Attach the roofing pieces [SG512] to the upper shelter beams [SG504], by installing self taped screws [SGS23]. Tighten the whole structure with spanners and appro- priate tools. Attach the unit with M12 dyna-bolts on each frame lug.