felton industries 3TGS3 Manual

WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE DOUBLE PLANK BACK REST SPECTATOR SEATING.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
DOUBLE PLANK BACK REST SPECTATOR
SEATING
PRODUCT CODE (3TGS3)
1
1
[3TGS1]
2
PART No.
3TGS1
3TGS2
3TGS3
3TGS4
3TGS5
3TGS6
3TGS7
3TGS8
3TGS9
[3TGS7x4]
[3TGS6x4]
[3TGS1]
[3TGS7x4]
[3TGS6x4]
6
[3TGS1]
PART NAME QTY
MAIN FRAME 4
BACK REST FLAT BAR 1
4000 mm.-BACK REST PLANK 1
4000mm.-SEATING PLANK 6
M10x35mm. CUP HEAD BOLT 4
104
M6x25 mm. HEX. HEAD BOLT
M6 LOCKNUT 104
M10 LOCKNUT 4
4
M10 PLAIN WASHER
[3TGS7x4]
[3TGS6x4]
2
3
[3TGS1]
[3TSG4] [3TGS3] [3TGS1]
[3TSG7/8] [3TGS9]
[3TGS5/6]
A. Have two external frames
[3TGS1] in place, with lugs
facing inwards and secure them
to the back and front seating
2
planks [3TGS4], by using hexag-
onal head bolts [3TGS6] and
locknuts [3TGS7] -finger tight-
1
en .
B. STEP 2: Install the two central
frames
them to the seating planks
[3TGS4], with hexagonal head
bolts [3TGS6] and locknuts
[3TGS7]
(STEP2).
[3TGS1]
3
A. Install the rest of the
4
[3TGS1]
5
[1]
[3TGS2]
[3TGS1], and secure
- finger tighten
seating planks [3TGS4]
on the back, front and
centre as per the illus-
trated sequence. Make
sure to secure the
seating planks [3TGS4]
to the frames, by using
hexagonal head bolts
[3TGS6] and locknuts
[3TGS7] -finger tighten.
1