Select Waypoints In The Route; Ais Operation; View The Other Vessels On The Chart - Xinuo Wal-way iChart User Manual

Electronic chart system

2-8-5 Select waypoints in the route

You can select a waypoint through the following methods in the route under the
of the planned route navigation
● Select the next waypoint in the normal navigation state. Press〖*〗,at this time ,the
meaning of the button.is next.
● Select
the previous
time ,the meaning of the button.is previous.

2-9 AIS Operation

The system can connect AIS equipment,.The position of the ships will dynamic
display on the chart form the output of AIS. So you can intuitive understand the
position, heading, speed, MMSI, call sign, name, size of the nearby ships,.thus it offer
the reference and basis for the collision and the

2-9-1 View the other Vessels on the chart

Note: 1.The response time of the
vessel. the speed faster, the
from the own ship is less than 2 nautical miles. the ship will become a red and black
flashing, otherwise green and black flashing.
2. The static of the ship information, such as the name of vessel, call sign etc, return
waypoint in the normal navigation state. Press 〖 # 〗 ,at this
Vessels'position is connected with the status of the
response time is shorter. When the distance of the ship
34
navigation plan.
status