Invoke The Route - Xinuo Wal-way iChart User Manual

Electronic chart system

2-8-4 Invoke the route

When you use the plan routes navigation,,there are forward navigation and reverse
navigation two patterns.
Method one: goes into the Route list menu, select routes navigation
Press the 〖menu〗 on the remote control e keyboard, call up the 【main menu】 , from
the main menu, select " Route List ", press 〖ok〗 into the 【route list】 menu, select
a non-empty route, press the 〖 ok 〗 , select "
forward navigation" or "reverse
navigation" in the【route operations】.
Method two: Called by keyboard directly
〖 〗 , then pop-up 【 call navigation data 】 .At this time ,you can call
Press the call
waypoints to navigation.and press the 〖 → 〗 key to switch to the forward route calls or
〖 ↑ 〗 〖 ↓ 〗
the reverse route calls on the remote control keyboard. Then press the to enter
〖 〗 to the route navigation
number column.to input the number of routes. press ok
state. As shown below:
Note:1. Select the first line of the" call navigation data",press 〖←〗 〖→〗 to select
the forward route navigation or the reverse route navigation.
2. The name of waypoints and routes can't be modified.
33