Table of Contents
Advertisement
Electronic chart system
Tip: The air outlet connection must be tightened to avoid loose during the voyage
1-2-2 The installation of the GPS antenna
The screw on the antenna connector must be rotated in a clockwise direction to ensure
good contact,when you connect the GPS antenna.
When you want to disconnect theGPS, you can rotate the antenna connector
counter-clockwise and then disconnected.It can not receive GPS signal in the room
Antenna must to be installed around obstacles block on the ship.The nearby obstacles
may block the reception. of satellite signals.
1-3 Switch on the system
All ready, you can connect the power source, open the machine, open the host "Power
button",.You will see the interface welcome to use, the system startup, and GPS start
to locate position.
Note: it will take a long time to locate the position after first switching on for the
system
1-4 Keyboard introduces
The front panel buttons description：
1: loudspeaker
2: Switch/Brightness to adjust
9
Hide quick links:
Advertisement
Table of Contents
