GARCARE GPHT06 Manual page 12

For the pole hedge trimmer GPHT07
This model just can be the pole hedge trimmer
Assembly:
1.Loosen the 4 pcs screws on the rotary handle(3) and take out the big screw at the
middle of the screw(Fig12) .
2. Put the telescopic tube into the rotary handle ,tighten the big screw and 4 pcs
screw .
Adjustment of engine head
Press the rotating knob (12) adjust the engine head until it snaps into the desired
position.
After adjustment make sure that the angle adjustment buttons have returned to
their initial positions. Otherwise the tool cannot start.