GARCARE GPHT06 Manual page 11

Starting and stopping the normal hedge trimmer without telescopic tube (Fig. 10)
To start: Grasp the front handle (14) with one hand, and press the front handle switch
(13). Then grasp the rear handle with the other hand, and press the safety button (2) first,
then operate the ON/OFF switch (17). Release the safety button once the motor has
started.
To stop: Release one of the two switches (17, 13).
Adjustment of engine head (Fig. 11 and 12)
Disconnect your gardening tool from the power supply.
Press the locking button for engine head adjustment (18) or push the rotating knob (12)
forward, and adjust the engine head until it snaps into the desired position.
Fig. 10
Fig. 11
Fig. 12