GARCARE GPHT06 Manual page 10

Assembly of the normal hedge trimmer without the telescopic tube .(Fig. 7)
Open the quick release button (3) of the housing.
Put the rear handle (1) into the opening of the housing.
Lock the quick release button(3).
Adjustment length of the telescopic tube (Fig. 8)
Disconnect your gardening tool from the power supply.
Loosen the locking knob for length adjustment (9) completely and push the telescopic
tube to the desired length, finally tighten the locking knob firmly.
Starting and stopping the pole hedge trimmer with the telescopic tube (Fig. 9)
To start the tool: push the safety button (2) forward and press the ON/OFF switch (17) at
same time ,Release the safety button(2) once the motor has started.
To stop the hedge trimmer: Release the ON/OFF switch.
Fig. 7
Fig. 8
Fig. 9