TRANSPORTING YOUR WORK PLATFORM
MODEL 195
TRAIL POSITION
Shown above is an example of a Model 195
in trial position for highway tow. The example
consists of a Model 195 with optional wide tires,
2" ball hitch, and 2 Intermediate Levels. Saddle
weights are not to be lift on unit when towing
and should not be transported separately.
When readying for tow behind a vehicle, be sure REAR STEERING TONGUE IS LOCKED DOWN IN PLACE
WHEN LOWERING THE PLATFORM(S) ONLY 1 PERSON SHOULD BE OPERATING THE WINCH AND
RELEASE ROPE FOR EACH WINCH. THE OPERATOR SHOULD NOT BE UNDER THE PLATFORM.
THE OPERATOR SHOULD FIRMLY GRAB THE WINCH IN ONE HAND AND THE ROPE IN THE OTHER.
DO NOT ALLOW ANYONE EXCEPT THE WINCH OPERATOR TO HOLD THE ROPE.
ADDITIONAL WINCH OPERATING INSTRUCTIONS
IF YOU LOSE YOUR GRIP ON THE WINCH, RELASE THE ROP.
MANUAL 2010 March
Shown above is an example of a Model 139.
in trail position for highway tow. The example
consists of a Model 139 with optional wide tires,
2" ball hitch, 1 Intermediate Level, and a Light Bar.
To tow, in trail position, adjusting arm threads
Must be screwed completely in to give a clearance
of approximately 13ft. 5in.
17
MODEL 139
IN TRAIL POSITION
Need help?
Do you have a question about the 139 and is the answer not in the manual?
Questions and answers