System Operation; Electrical Connection; To Turn On The Unit; To Turn Off The Unit - Intellipure 950P Installation Manual

950P Portable Air Cleaning System
#10065

System Operation

ELECTRICAL CONNECTION

Inspect power cord for damage before plugging in.
The outlet must be grounded.

TO TURN ON THE UNIT

Plug the unit in. Turn on the ON/SPEED located on the front of the unit, the power indicator should
illuminate, indicating the power is on, the Blue LEDS indicating blower speed and DFS function should also
come on.

TO TURN OFF THE UNIT

To turn off the unit, simply turn off the main switch located on the front of the unit.
fig-I
950P REMOTE
Each unit is also equipped with a Remote Control.
The Remote has 3 buttons:
ON/SPEED
OFF
FS
© Intellipure 2015 #10065
950P Portable Air Cleaning System
(fig-I)
Do not connect power to the unit until the High Energy Grid wires have been
checked for proper connection. (Refer to page 10)
Disconnect power to the unit before servicing. Moving Parts inside.
Wait 30 seconds after turning the unit off before opening the Filter Access
Door.
®
(fig-J)
Turns the unit on and controls the speed of the fan.
Turns the unit off
Turns the FS on and off
15
LO TURBO
fig-J
®
© Intellipure 2015