System Operation - Intellipure 950P Operation Manual

System Operation

ELECTRICAL CONNECTION
Inspect power cord for damage before plugging in. The outlet must be grounded. If the supply cord is damaged,
it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
On-board Touch Pad Diagram
a b
a) Power button
b) Sleep mode
c) Slide speed control
d) High speed
e) Turbo mode
Disconnect power to the unit before servicing. Moving Parts inside. Wait
30 seconds after turning the unit off before opening the Filter Access Door.
The touch control technology is designed to operate under minimal pressure.
Lightly touch or slide over the buttons for an optimal user experience.
Intellipure © 2021 All rights reserved.
c d
f-1) VOC Pre-filter indicator
f-2) Change VOC pre-filter indicator
g-1) Main filter indicator
g-2) Change main filter indicator
h-1) VOC post-filter indicator
f-1
e
f-2
h-2) Change VOC post-filter indicator
i-1) DFS indicator
i-2) DFS deactivation indicator
8
i-1
g-1 h-1
g-2 h-2 i-2