Advertisement
pmvmounts
Assembly instructions for desk top monitor / TV stand
Up to 4Kgs
Model No.
PMVDESKTOP
Assembly kit checklist
X3
A - M6 x 12mm
B - M5 x 8mm
X2
(pre-assembled)
X2
C - M6 x 12mm
(pre-assembled)
Screen fixing kit
X4
D - M4 x16mm
X4
E - M5 x 16mm
X4
F - M6 x 16mm
X4
G - M5 washer
X1
4mm Allen key
Also required
2
Fix mount to screen
The fixing plate has VESA patterns for 50, 75 and 100mm VESA applicable screens. There are also x8 6.5mm holes for use with additional extenders if required.
A - Match the VESA pattern to your screen, 50, 75 or 100 VESA.
Read these instructions carefully before assembling this equipment.
Check the equipment has been supplied with all parts and fixtures prior to assembly.
.co.uk
Assemble in a suitable location.
Do not attempt to alter or modify any part of the equipment or its attachments.
Do not use if any parts are broken or appear to be damaged.
Tighten all bolts and fixings securely with appropriately sized tools.
Factory No.
Only use fixings provided with this bracket.
PMVDESKTOP
Do not position the equipment close to sources of heat or moisture.
1
Assemble stand.
Attach the base to the upright using X3 countersunk bolts (A)
B - Insert correct fixings from your screen fixing kit.
D-Fx4
Gx4
Advertisement
Table of Contents
Related Manuals for pmvmounts PMVDESKTOP
Summary of Contents for pmvmounts PMVDESKTOP
- Page 1 Tighten all bolts and fixings securely with appropriately sized tools. Model No. Factory No. Only use fixings provided with this bracket. PMVDESKTOP PMVDESKTOP Do not position the equipment close to sources of heat or moisture. Assembly kit checklist Assemble stand.
- Page 2 Mount screen on to stand and secure. B - Insert safety X2 safety screws (C) A - Hook the fixed axle of the screen adapter in to the matching groove on the desktop upright. Height adjustment Note: Bolts must be re-inserted and tightened after adjustment.
Need help?
Do you have a question about the PMVDESKTOP and is the answer not in the manual?
Questions and answers