Table of Contents
Advertisement
3.
Environmental Considerations
03
S-Energy PV Module Installation Manual
1)
2)
CAUTION
Do not scratch by a sharp tool on the module
frame and surface. Abrasion of the coated
surface may lead to oxidize frames or reduce
their strength.The scratch of the surface may
be the main cause of the module output
degradation and decrease in strength.
The front surface of the module shall not be
exposed to sunlight artificially.
[It can cause performance degradation due
to solar cell degradation.]
Do not touch or give shocks to the Junction
box as well as front and rear surface of
module, and do not remove the label.
Do not touch with wet hands or equipment,
which can result in electric shock.
ENVIRONMENTAL CONSIDERATIONS
The shading of the front surface is the main cause of hot spot or
performance reduction of power generation.
The ground should have well drained soil.
CAUTION
Prohibited taking J-box cable when you
handle the modules.
[Resulting in electrical disconnection.]
Prohibited connecting diagonally Male &
Female when electrical [connector] connecting.
[Resulting in poor contact.]
Cable outer diameter of 8mm/ Recommended
by more than 48mm radius of curvature.
[Cable minimum bend radius is more than
6 times the cable diameter when wiring.]
Cable wiring securely fixed to prevent shaking
in the wind with cable tie.
[However, consider summer/winter thermal
expansion/contraction.]
Advertisement
Table of Contents
