Legend Brands DRI-EAZ PHD 200 Owner's Manual

Legend Brands DRI-EAZ PHD 200 Owner's Manual

Hide thumbs Also See for DRI-EAZ PHD 200:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

The Legend Brands
ter vapor from the air. The PHD 200 is ideal for crawlspace drying, humidity control and other applications
requiring high-performance dehumidification. (Not intended for professional water damage restoration.)
WARNING
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your unit in any
way. Use only replacement parts authorized by Leg-
end Brands Products, Inc. Modifications or use of
unapproved parts could create a hazard and will
void your warranty. Contact your authorized distrib-
utor for assistance.
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or dehu-
midifier resulting from improper removal of the
power cord is not covered by warranty. The IEC
power cord is a wear item and is not covered by
warranty.
07-01913L F515
Owner's Manual
PHD 200 Dehumidifier
LEGEND BRANDS PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 CrawlspaceDry.com
®
PHD 200 Dehumidifier reduces humidity in enclosed environments by removing wa-
Patents: http://www.LBpatents.com
S A V E T H E S E I N S T R U C T I O N S
Model F515
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
• Inspect the power cord before use. If cord is dam-
aged, do not use. Always grasp the plug (not the
cord) to unplug.
• Insert three-prong plug on power cord into a match-
ing electrically grounded outlet. Do not use adapter.
Never cut off third prong. Do not use an extension
cord.
• The unit must be operated on a 115V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Keep motor and wiring dry.
• Do not attempt to repair the unit. For Authorized
Service Centers, contact Legend Brands.
BEFORE YOU BEGIN
Warranty registration
Visit warranty.LegendBrandsRestoration.com to register
your purchase. Registration allows us to better assist
you with using, maintaining or servicing your equipment
and to contact you in case we have important safety in-
formation concerning your Legend Brands product. If
you determine service is required, have your equipment
model, serial number and original proof of purchase
available and call your distributor for assistance with ob-
taining a return material authorization (RMA).
INTRODUCTION
The PHD 200 Dehumidifier reduces humidity in enclosed
structural environments by removing water vapor from
the air. With proper use, the PHD 200 can help to dry out
damp structural materials, insulation, and contents, and
maintain a healthy level of humidity. Using the PHD 200
may also prevent secondary damage caused by high hu-
midity.
1
Legend Brands Products, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DRI-EAZ PHD 200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Legend Brands DRI-EAZ PHD 200

  • Page 1 CORRECT PLUG REMOVAL and to contact you in case we have important safety in- formation concerning your Legend Brands product. If Grasp IEC plug and pull straight out you determine service is required, have your equipment...
  • Page 2 For more information about creating an optimum drying environment, contact readouts. This is part of the unit’s self-diagnosis proce- Legend Brands at 800-932-3030. dure and no user intervention is required. TIP: Before installing in a crawlspace or other difficult to...
  • Page 3: Display Menu

    UNIT ON XX HRS and cycles between INLET XX°F and INLET XX%. NOTE: If no compressor delay countdown is displayed, a delay is not necessary and the machine will begin operation immedi- ately. 07-01913L F515 Legend Brands Products, Inc.
  • Page 4: User Settings

    12. FIRMWARE For information only. 3.0X FXXX-XXX 13. LIFE HOURS XXXX HRS (Returns to top menu item.) The following section available only on wireless-equipped units. 14. SENSOR ID XXXXXXXX (Returns to top menu item.) 07-01913L F515 Legend Brands Products, Inc.
  • Page 5: Before Moving The Unit

    5. Remove the power cord, coil it neatly, and secure Recommended it with one of the straps provided. Cordless drill, small knife, small-jaw pliers, coil clean- ing solution, rotomolded housing cleaning solution. 07-01913L F515 Legend Brands Products, Inc.
  • Page 6: System Messages

    CHECK FILTER > Prompt to clean or change filter. Change or clean filter. Press the > key to reset CLEAN COILS > Prompt to clean coils and interior. Clean coils. Press the > key to reset 07-01913L F515 Legend Brands Products, Inc.
  • Page 7: Error Messages

    ER6 CONTACT Current sensor failure. If error persists, contact service. SERVICE CENTER ER7 INVALID Incorrect or unsupported DIP switch settings. Contact Legend Brands service depart- MODEL SETTING ment for correct DIP switch settings. ER8 BUTTON STUCK Key is stuck or has been held down too long. Contact service.
  • Page 8: Troubleshooting

    Power 115V / 60Hz FOR PARTS AND SERVICE CALL YOUR LOCAL DIS- Air movement 180 CFM | 305 CMH TRIBUTOR or Legend Brands at 800-932-3030. 74 pts/day | 35 L/day LegendBrandsRestoration.com at 80°F/60% RH (AHAM) Water removal 120 pts/day | 57 L/day Visit warranty.LegendBrandsRestoration.com and regis-...
  • Page 9: Antes De Comenzar

    Manual del usuario Deshumidificador PHD 200 Modelo F515 LEGEND BRANDS PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233 Teléfono: 800-932-3030 Fax: 360-757-7950 CrawlspaceDry.com ® El deshumidificador Legend Brands PHD 200 reduce la humedad en ambientes cerrados al eliminar el vapor de agua del aire.
  • Page 10: Controles E Instrucciones De Operación

    También vea si hay torceduras u otras obstrucciones que podrían restringir el flujo de agua. Las obstrucciones pueden provocar una retención del agua y ocasionar derrames. 07-01913L F515 Legend Brands Products, Inc.
  • Page 11: Panel De Control

    HORAS) y alternará entre INLET XX°F (ENTRADA XX° F e INLET XX% (ENTRADA XX%). NOTA: Si no apa- rece ninguna cuenta regresiva de retardo del compresor, el retardo no es necesario y la máquina comenzará a funcionar de inmediato. 07-01913L F515 Legend Brands Products, Inc.
  • Page 12: Ajustes De Usuario

    13. TOTAL DE HRS XXXX HR (Regresa al elemento del menú superior). La siguiente sección está disponible sólo en las unidades equipadas con sistema inalámbrico. 14. SENSOR ID XXXXXXXX (Regresa al elemento del menú superior). 07-01913L F515 Legend Brands Products, Inc.
  • Page 13: Transporte Y Almacenamiento

    . Cuando se sado se vacíe por completo mientras se hace el complete el ciclo de purgado, apague la unidad. purgado, asegúrese de que la unidad esté en posición vertical sobre una superficie horizontal. 07-01913L F515 Legend Brands Products, Inc.
  • Page 14: Programa De Mantenimiento

    • Asegúrela durante el transporte para evitar desliza- mientos y posibles lesiones a los ocupantes del Limpie la válvula de retención y el depósito de la vehículo. bomba. Si la unidad muestra el mensaje ER9 BOMBA 07-01913L F515 Legend Brands Products, Inc.
  • Page 15: Mensajes Del Sistema

    Cambie el filtro. Presione la Indicación para cambiar el filtro. APAGADO tecla > para reiniciar LIMPIAR BOBINA Limpie las bobinas. Presione Indicación para limpiar las bobinas y el interior. APAGADO la tecla > para reiniciar 07-01913L F515 Legend Brands Products, Inc.
  • Page 16: Mensajes De Error

    Compruebe que no haya obstrucciones ¿La manguera está acodada debajo de la uni- ER9 BOMBA TAPADA dad o aplastada por una rueda? Verifique que no haya bloqueos en la bomba y repare BOMBA&MANGUERA de ser necesario. 07-01913L F515 Legend Brands Products, Inc.
  • Page 17: Resolución De Problemas

    California como causantes de cáncer, defectos congénitos u otros daños durante la gestación. Para obtener más información, visite P65Warnings.ca.gov 07-01913L F515 Legend Brands Products, Inc.
  • Page 18: Instructions De Sécurité Importantes

    Manuel du propriétaire Déshumidificateur PHD 200 Modèle F413-TX 115V LEGEND BRANDS PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233 CrawlspaceDry.com Téléphone : 800-932-3030 Fax : 360-757-7950 ® Le déshumidificateur Legend Brands PHD 200 réduit l’humidité dans des environnements clos en élimi- nant la vapeur d’eau de l’air.
  • Page 19 Lorsque l’appareil est branché à une prise secteur, l’af- fichage du panneau de commande affichera brièvement une série d’affichages. Cela fait partie de la procédure d’autodiagnostic de l’appareil et aucune intervention de l’utilisateur n’est requise. 07-01913L F515 Legend Brands Products, Inc.
  • Page 20: Panneau De Commande

    UP (ver le haut) pour régler le point de consigne pour le fonctionnement en mode Hygrostat. Voir Menu des paramètres utilisateur pour plus de détails. PURGE. Appuyer pour évacuer l’eau du réservoir de la pompe à condensat. L’affichage indique PUMP 07-01913L F515 Legend Brands Products, Inc.
  • Page 21 13. HRS TOTALES XXXX HRS (Retour aux éléments du menu principal.) La partie suivante n’est disponible que pour les unités équipées sans fil. 14. ID CAPTEUR XXXXXXXXX > (Retour aux éléments du menu principal.) 07-01913L F515 Legend Brands Products, Inc.
  • Page 22: Programme D'entretien

    Utiliser un aspirateur muni d’une 07-01913L F515 Legend Brands Products, Inc.
  • Page 23 PADA BOMBA&MANGUERA, le clapet anti-retour et le avec un nettoyant de bobine. réservoir de la pompe peuvent avoir besoin d’être netto- yés. Retirer les grilles et le couvercle comme indiqué sur 07-01913L F515 Legend Brands Products, Inc.
  • Page 24: Messages Du Système

    > pour réinitial- ETEINT filtre. iser Nettoyer les serpentins. Ap- Ce message apparaît pour indiquer qu’il faut nettoyer NETTOYER INT > puyez sur la touche > pour les serpentins et l’intérieur. ETEINT réinitialiser 07-01913L F515 Legend Brands Products, Inc.
  • Page 25: Messages D'erreur

    Cette action a généralement pour effet de réinitialiser l’électronique et l’unité com- mence à fonctionner normalement. Si le message d’erreur réapparaît, se référer aux explications et solutions expliquées ci-dessous. Si ces solutions ne corrigent pas le problème, contactez votre centre d’assistance et d’entretien local agréé. 07-01913L F515 Legend Brands Products, Inc.
  • Page 26 Vérifiez s’il y a des obstructions. Est-ce que le tuyau est tordu sous l’unité ou coincé ER9 BLOCAGE sous une roue ? Vérifiez que la pompe n’est pas obstruée et corrigez si nécessaire. POMPE/BOYAU 07-01913L F515 Legend Brands Products, Inc.
  • Page 27: Dépannage

    115V / 60Hz POUR DES PIÈCES DE RECHANGE ET SERVICE ap- Mouvement de l’air 180 CFM | 305 CMH peler votre distributeur local ou Legend Brands au 74 pintes/jour | 35 L/jour 800-932-3030. CrawlspaceDry.com à 80°F/60% HR (AHAM) Évacuation de l’eau Visiter warranty.LegendBrandsRestoration.com et en-...

This manual is also suitable for:

F515

Table of Contents

Save PDF