Advertisement
Quick Links
D E B O X I N G A N D I N S T A L L A T I O N
1. Vault cabinets are shipped in wood crates that are designed and constructed to ensure they are
protected during transport. The massive wood crates include thick foam insulation.
2. Snap the metal bands with shears.
3. Begining with the top, remove the all of the screws with a portable drill and discard the lid.
4. Remove the front side of the crate, then remove both sides.
I N S T R U C T I O N S
P R O F E S S I O N A L
S E R I E S
C
U
S
T
O
M
B
U
I
L
T
Advertisement
Related Manuals for VAULT Professional Series
Summary of Contents for VAULT Professional Series
- Page 1 I N S T R U C T I O N S 1. Vault cabinets are shipped in wood crates that are designed and constructed to ensure they are protected during transport. The massive wood crates include thick foam insulation.
- Page 2 5. Using a pallet jack, raise cabinet and screw leg levelers into the bottom of each frame. 6. With the leg levelers installed, raise cabinet on pallet jack and move into position. 7. With cabinet in positon and using a level, raise and lower leg levelers until it is level with the floor and adjoining cabinets.
- Page 3 R E M O V I N G P R O T E C T I V E F I L M I N S T R U C T I O N S Your VAULT cabinets have a protective vinyl film that covers many surfaces. It is necessary to use protective film for two purposes: (a) To protect metal parts from damage during manufacturing AND (2) Prevent scratches to the panels during assembly and transit.
- Page 4 A N D T H E I R O P E R A T I O N has designed our drawers so that they can be easily removed to make cleaning easier. To VAULT® remove the drawer, simply pull the drawer open and lift the drawer up and outward.
- Page 5 Now that all the cabinets are installed, it is time to align doors and drawers. This is a critical, final step to ensure perfect cabinetry lines. All VAULT® cabinets have fully adjustable hinges manufactured by industry leader ‘Blum’. Should the doors on your VAULT® cabinets come out of alignment over time ( such as rubbing against the frame), you can easily adjust them in 3 directions, using a Phillips head type screwdriver and following these easy instructions.
Need help?
Do you have a question about the Professional Series and is the answer not in the manual?
Questions and answers