Connect The Stackwise Cables - Cisco Catalyst 3750E-48PD-F Getting Started Manual

Connect the StackWise Cables

Use the window in the StackWise cable to align the connector correctly. Insert the cable into the
StackWise port on the back of the switch. Using a ratcheting torque screwdriver, tighten the retainer
screws to 5 lbf-in. (80 ozf-in.). Insert the other end of the cable into the connector of the other switch,
and tighten the retainer screws to 5 lbf-in. (80 ozf-in.). Avoid overtightening the screws. Always use a
Cisco-approved StackWise cable to connect the switches.
Removing and installing the StackWise cable can shorten its useful life. Do not remove
Caution
and insert the cable more often than is absolutely necessary.
C O N S O
S T A C K
1
S T A C K
2
L E
S E R IA L
1 0 /1 0 0 T
X
19