PASCO SPARK LXi2 Product Manual

SPARK LXi2 Datalogger
Included Equipment
• Voltage Probe
• Fast Response Temperature Probe
• USB Charger with USB Cable
Introduction
The SPARK LXi2 is a combination datalogging device and
interface with a ruggedized cover. It blends PASCO
probeware with PASCO data collection and analysis
software programs. The SPARK LXi2 features two
PASPORT input ports as well as ports for the included
temperature probe and voltage probe. The USB-A
Communication Port allows USB devices such as thumb
drives to be connected.
Components
(PS-3600B)
1. Power Button
Press and hold to turn the device on or off.
2. PASPORT Input 1
Use this port to connect a PASPORT sensor.
3. Voltage Input Port
Use this port to connect the included Voltage Probe.
4. USB-A Communications Port
Use this port to connect a USB device, such as a
USB flash drive.
5. Temperature Probe Port
Use this port to connect the included Temperature
Probe.
6. PASPORT Input 2
Use this port to connect a second PASPORT sensor.
7. USB-C Charging Port
Connect the included USB charger to charge the
battery.
8. Battery Charging Status Light
This light indicates the charging status of the battery.
The light is yellow when charging and turns green
when fully charged.
9. Camera
Use the camera to record images in SPARKvue.
10. Headphone Jacks
11. Volume Control
Product Guide | 012-17261A
1