Grain Wood Furniture SH040111 Assembly Instructions Manual

Shaker collection 2 drawer nightstand

Thank you for purchasing our furniture, it's an honor to be

in your home!

Every effort has been made to ensure your Wood Furniture is

of the finest quality. If you have any questions or need

any replacement parts, please do not hesitate to contact

us at www.grainwoodfurniture.com .

REV - 6/2016

Assembly Instructions

Shaker Collection

2 Drawer Nightstand

20"

23 "

MADE IN BRAZIL

PH#2

16"

www.grainwoodfurniture.com

Model #

SH040111

040211

040311

040411

Finish

Cherry

Expresso

Honey

Walnut

page 1/8

Table of Contents

Need help?

Do you have a question about the SH040111 and is the answer not in the manual?

Page 1 Every effort has been made to ensure your Wood Furniture is of the finest quality. If you have any questions or need any replacement parts, please do not hesitate to contact us at www.grainwoodfurniture.com . www.grainwoodfurniture.com Model # Finish Cherry SH040111 PH#2 Expresso 040211 Honey 040311 Walnut 040411...
Page 2 Here are some tips on assembling your flat-pack furniture in order to minimize your assembly time and frustrations: -Do Not throw away packaging material until assembly is complete. -Assemble the item on a soft surface, such as cardboard or old blanket, to protect finish from possible dents of scratches.
Page 3 ATTENTION Before starting assembly please verify if the hardware set is complete. For missing hardware please contact us at www.grainwoodfurniture.com HARDWARE LIST 27 + 2 4,0x30 18 + 2 3,5x14 02 + 1 M4x25 24 + 2 8,0x25 10x10 350mm - 13 3/4" 350mm - 13 3/4"...
Page 4 Parts list Box 1 Part # Description Right side Left side Upper crosspiece Lower crosspiece Rear crosspiece Back panel Drawer front Drawer right side Drawer Left side Drawer bottom Drawer back Hardware page 4/8...
Page 5 8,0x25 3,5x14 350mm - 13 3/4" 350mm - 13 3/4" page 5/8...
Page 6 4,0x30 4,0x30 page 6/8...
Page 7 10x10 3,5x14 10x10 page 7/8...
Page 8 4,0x30 FLIP THE ASSEMBLED DRAWER UPSIDE DOWN TO INSTALL GLIDES 3,5x14 350mm - 13 3/4" 350mm - 13 3/4" M4x25 If fine tunning on the glides is needed please follow the steps below page 8/8...

Sh040211Sh040311Sh040411