Table of Contents
Advertisement
MiniPCIeCAN-2E-U
MiniPCIe Interface CAN Card User Manual
1. Functions
MiniPCIeCAN-2E-U is a high-performance MiniPCIe interface CAN card launched by
ZLG Electronics, which can connect the CAN network to a computer equipped with a
MiniPCIe card slot. MiniPCIeCAN-2E-U adopts the MiniPCIe board in standard
dimensions and can be easily installed on laptop or industrial computer with MiniPCIe
interface, making it a powerful CAN analyzer. See the figure. .
MiniPCIeCAN-2E-U integrates two CAN interfaces. In addition, to facilitate expansion,
the second function pin of the CAN signal can be switched to the reserved IO port of the
MiniPCIe interface by using the resistor R24, which helps the user design the CAN
transceiver circuit on the backplane.
The MiniPCIeCAN-2E-U high-performance CAN interface card can be used to
connect the PC to the CAN-bus network through USB bus, which constitutes a CAN-bus
network control node for data processing and data acquisition in CAN-bus network fields
such as fieldbus laboratories, industrial control, high-performance residential areas, and
automotive electronic networks.
The MiniPCIeCAN-2E-U high-performance CAN interface card is a powerful tool for
CAN-bus product development and CAN-bus data analysis; moreover, it features small
size, plug and play, etc. It is ideal for portable system users.
The MiniPCIeCAN-2E-U high-performance CAN interface card supports Windows
2000/XP/7/8/10 and other operating systems. MiniPCIeCAN-2E-U provides a unified
application programming interface and complete application demonstration codes,
including VC, VB, Delphi and C++ development routine demonstrations, which helps
users develop application programs.
The MiniPCIeCAN-2E-U interface card supports the CANTest general test software,
which can perform functions such as sending, receiving and monitoring CAN-bus
messages.
The MiniPCEeCAN card uses the USB D+ and USB D- signal cable in the MiniPCIe
slot. Before purchasing and using the product, check whether the MiniPCIe slot on the
motherboard provides USB D+ and USB D- signal pins. See Table 2.3 for pin numbers.
This CAN card cannot be used if the USB signal pin is missing from the motherboard slot.
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
2
User Manual
Advertisement
Table of Contents
