Table of Contents
Advertisement
MiniPCIeCAN-2E-U
MiniPCIe Interface CAN Card User Manual
User Manual
Figure 4.16 Sending
Figure 4.17 Receiving
4.2.4 Real-time Saving and Stopping Saving
When you need to record messages for a long time, use the real-time saving function.
When the software buffer is full, transfer it to the file (CSV format) in the hard disk, and
clear the software buffer. The message file names can be automatically numbered
sequentially. Enable this function before starting. Note that the save location cannot be
specified in the C drive. Otherwise, saving may fail. When you click Stop Saving, the
transfer will not be performed, as shown in Figure 4.18.
Figure 4.18 Saving
4.2.5 DBC Decoding and Display by ID
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
19
Advertisement
Table of Contents
