Table of Contents
Advertisement
MiniPCIeCAN-2E-U
MiniPCIe Interface CAN Card User Manual
4.2.3 Sending Data
When you start the CAN successfully, set the parameters of the CAN frame you want
to send, as shown in Figure 4.14. Click the "Send" button to send the data(The self-sent
and self-receive option in the Sending Format drop-down box indicates that the sent CAN
frame can also be received by itself. This option is only needed during testing; select
normal transmission in practical applications).
Click the "Advanced Operation" tab to display the advanced operation page. On this
page, you can set to send multiple different CAN frames each time (a maximum of 100
frames can be set), and the interval between each frame and between each batch, as
shown in Figure 4.15.
Figure 4.16 and Figure 4.17 show the sending and receiving effect.
Figure 4.14 Basic settings for sending data
Figure 4.15 Advanced settings for sending data
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
18
User Manual
Advertisement
Table of Contents
