Adjusting The Handlebars; Cleaning And Maintenance; Safe Maintenance; Wheels And Bearings - HOMCOM 371-045V00 User Manual

Adjusting the handlebars

Cleaning and maintenance

Use a wet cloth to wipe this product. Do not use an industrial cleaner as this can
damage its surface. Do not use alcohol or ammonia cleaner – this can damage the
plastic parts or soften the stickers on the appliance. Keep this scooter in a dry
place, free of dust.

Safe maintenance:

Regularly check all screws are fastened and the wheels are in good condition. If
wheels are worn, they must be replaced to ensure safe riding. Clean the scooter
with a damp cloth after each use.

Wheels and bearings:

Inspect wheels and bearing regularly, ensuring they are in good condition. If the
wheels make an abnormal sound, ensure they are replaced with the same wheels
from the manufacturer. Wear and tear from long usage or using different wheels
that don't match is a safety hazard, which is not part of the warranty conditions.
Raising the lever:
1) Open the lock to the left.
2) Press the pinball, which is above the lever limit hole.
3) Pull the handlebars until the marble pops up and the
lock turns right, locking back into place.
Lowering the lever:
1) Open the lock to the left.
2) Press the pinball, which is above the lever limit hole.
3) Press down on the handlebars until the marble pops
out and the lock turns right, locking back into place.