4. TOP HOLDER ASSEMBLY
Parts Required:
Top Holder A & B & C, Hex Bolt, Nut Bolt, 20MM Screws*4
Holder A
Holder B
Holder C
Position Top Holder A and Top Holder B together to align their screw holes.
Together with Top Holder A and B, insert both parts into Top Holder C.
When all parts are aligned, fix with a bolt and nut. The bolt and nut should
pass through Top Holder A, B, and C.
The overhead light assembly includes an LED wire, which can be inserted
through Top Holder B and C. One side will have designated cut-outs for the
wire to pass through. Connect the LED wire by locating it's pair connector
from the car body. With the entire assembled Top Holder Assembly, insert
into the car body, and fix with screws underneath the car.
9