Translation of the original manual English Monodisc Grinding machine FLAMENCO, 230 V / 50 HZ D, F, A #056365 Monodisc Grinding machine FLAMENCO, 230 V / 50 HZ #059736 Monodisc Grinding machine FLAMENCO, 230 V / 50 HZ #059737 Read before use and keep safe Contents Technical data .
Authorised to issue this declaration and for the gathering of the technical documentation. 10.02.2015 i.V. WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 3.0 Safety instructions Disconnect the power supply before any maintenance is carried out. Use only recommended mounting discs and brushes. The mounting discs must have a plain surface.
Grinding machine FLAMENCO. It must be emphasized that parts obtained from unauthorized sources must not be used. Wolff cannot be held responsible for the performance of or any damage arising from the use of machines in which genuine spare parts have not been used.
Block A by pushing down the upper support Insert C as shown in the picture Insert B in the hole on the handle Insert the ring in the lever Screw the catch on the pushrod Check that the chain B is not under tension Einscheibenschleifmaschine FLAMENCO, #053365...
6.0 Use of grinding and milling discs For the grinding machine FLAMENCO we provide a variety of accessories. The following table contains the information to choose the right disc for your need, It is meant as guiding principle for the different applications.
Page 6
System carbide milling disc, #013569: for removing thick adhesive residues and fibre-, felt- and foam residues (scraping action) System diamond milling disc, #020943 for grinding extremely hard smoothing compounds and industrial floors, as well as epoxy- and polyester coatings Einscheibenschleifmaschine FLAMENCO, #053365...
Assembly of handle wrong Assemble handle like described in Item 5.0 Switch-on lever (4) Safety lever (4) can only be Lower the handle of cannot be actuated actuated, if handle not vertical the machine Einscheibenschleifmaschine FLAMENCO, #053365...
Page 8
When making a claim under guarantee, the invoice and/or proof of purchase must be provided. All repairs covered by the guarantee must be carried out by a Wolff service shop recognised by us. Repairs which are carried out by the customer and/or improperly automatically lead to a disentitlement from guaran- tee claims.