Viessmann WAGO BACnet/IP Installation And Service Instructions Manual page 10

Installation
Quick Start Guide WAGO BACnet
10
WAGO Gateway Installation and Service
(continued)
WAGO BACnet Configurator - Set BACnet Device ID
(Optional)
Note: download the tool from the link on the left.
1. Scan the network for BACnet devices
2. Right click on the WAGO Gateway, and select
"Add to Database"
3. Switch to the "Database" tab, right click on the
device and select "Configure"
4. Change the "Device Instance No" and "Name" ,
then "Store and Download"