AGFA Classic E.O.S. User Manual page 13

3
After a while, the following message indicates that the processor is ready for
operation:
5($'<
53
The actual temperature to be reached depends upon the setting for the actual pro-
cessing cycle.
Reference manual.
After switching on
1
Introduce large sheets of blank films (cleaning films), e.g. film size 35x43 cm/
14x17 inch, when the processor has been on standby for an extended period of
time, e.g. overnight, to remove any deposits or residue from the transport path of
the film.
2
It might be necessary to initiate an additional developer replenishment, depend-
ing on the start-up developer replenishment setting, which can be set ON or
OFF.
If set ON, an automatic replenishment is initiated automatically when switching the
processor on.
Classic E.O.S. Reference manual.
1281C GB 20001204
d&
Refer to 'Developer temperature' on page 36 of the Classic E.O.S.
Refer to 'Setting the start-up replenishment function' on page 47 of the
13