Intended Use; Product Information; Spare Parts Lists - Viessmann WAGO MB/TCP Installation And Service Instructions Manual

WAGO Gateway Installation and Service

Intended Use

Intended use
The gateway is only intended to be installed and operated
in conjunction with Viessmann control units, with due
attention paid to the associated installation, service and
operating instructions. The gateway may only be used
in systems with supported Viessmann heat and power
generators.
The gateway can only be used with the user and
communication interfaces defined in the product
documentation for the following purposes:
H To monitor systems
H To operate systems
H To optimize systems

Product Information

Spare Parts Lists

With regard to the communication interfaces, ensure
on site that the system requirements specified in the
product documentation are met at all times for every
transfer medium employed. Only use the specified
components for the power supply (e.g. power supply units).
Intended use presupposes that a fixed installation in
conjunction with permissible, system-specific components
has been carried out.
Commercial or industrial use for a purpose other than
the monitoring, operation and optimization of supported,
approved systems shall be deemed inappropriate.
Incorrect usage or operation of the appliance (e.g. the
appliance being opened by the system user) is prohibited
and will result in an exclusion of liability. Incorrect usage
also occurs if the components in the Viessmann system
are modified from their intended function.
The WAGO MB/TCP gateway and the WAGO MB/RTU
gateway are used to connect Viessmann control units
to Modbus systems. For supported devices and other
valid product documentation, see;
www automationgateway.info
Functions
The gateway enables system users to utilise the following
functions in conjunction with a Modbus system:
H Transferring heating system operating states
H Setting heating system parameters
H Relaying fault and maintenance messages
Information about spare parts can be found at
www.viessmann.com/etapp or in the Viessmann
spare part app.
Installation
5