Connecting And Releasing Cores - Viessmann WAGO MB/TCP Installation And Service Instructions Manual
Bms communication with heating systems via modbus
Hide thumbs
Also See for WAGO MB/TCP:
Table of Contents
Advertisement
Installation
Connecting and Releasing Cores
Connections
WAGO MB/TCP gateway
Power supply unit
12
WAGO Gateway Installation and Service
1. Insert a small flat head screwdriver into the opening
direcly above the wire..
2. Tilt the handle of the screwdriver up.
3. Pull the wire straight out.
1. Using a small screwdriver push in the orange button
directly above the wire.
2. Pull the wire straight out.
Advertisement
Table of Contents
