Advertisement
5
Installing the New Belt Cover
Bracket
60- and 72-inch Mowers
Parts needed for this procedure:
1
Belt cover bracket
2
Carriage bolt (1/4 x 3/4 inches)
2
Locknut (1/4 inch)
Procedure
Install the belt cover bracket with 2 carriage bolts (1/4 x 3/4
inches) and 2 locknuts (1/4 inch) as shown in
1. Locknut, (1/4 inch)
2. Bracket for 60- and 72-inch
mower decks
Figure
Figure 7
3. Carriage bolt (1/4 x 3/4
inches)
6
Installing the Blower
Assembly, Bagger Belt,
Spring and Blower-Belt Cover
Parts needed for this procedure:
1
Blower assembly
1
Bagger belt
1
Blower belt cover
1
Spring
Procedure
Refer to the bagger Operator's Manual for the correct procedure
7.
to install the blower, bagger belt, spring, and blower-belt
cover.
5
Advertisement
