IMPORTANT: Read the following safety and operation instructions to avoid injury and to avoid damage to equipment or property. Plug unit into a properly grounded electrical outlet of the correct voltage, size, and plug configuration for this unit. We recommend usage on an individual branch circuit of at least 15 amps for best results. Failure to do so may result in decreased performance of the warmer.
TEMPERATURE The amount of product placed in the warmer will affect the performance of the warmer. We suggest periodically checking the internal temperature of the product and adjusting the temperature settings if necessary. Keep door(s) closed when not serving. The following temperatures are APPROXIMATE and can vary due to unit location, electrical supply, product used, etc.
TROUBLESHOOTING: Unplug unit from power source, and allow to cool completely before performing any maintenance or cleaning. Unit not working: • Check power switch position, power cord, and/or electrical circuit Display light not working • Tighten or replace bulb Loud noise coming from unit: •...
Page 5
7” 16AWG WHITE 1/4FC-3/8ST 300V 200C 00140 WIRE NUT 0016187 15” 18AWG GROUND WIRE 0022369 WIRE HARNESS 727 0016170 GROUND WIRE I013175 READY TO GO DECAL 580/727/737 P .O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com...