Advertisement
Quick Links
DESCRIPTION
This document illustrates how to replace the Heating Element for model 520.
TOOLS NEEDED
•
#2 Phillips Screwdriver
•
Small, Flathead Screwdriver
•
Pliers
FS140140 REV: ORIG
7-15-2020
HEATING ELEMENT REPLACEMENT
PARTS INCLUDED
•
(1) 0022841 - Regulating Thermostat
MODEL 520
0022824SK
Page 1 of 4
Advertisement
Related Manuals for Wisco Industries 520
Summary of Contents for Wisco Industries 520
- Page 1 MODEL 520 HEATING ELEMENT REPLACEMENT 0022824SK DESCRIPTION This document illustrates how to replace the Heating Element for model 520. TOOLS NEEDED PARTS INCLUDED • #2 Phillips Screwdriver • (1) 0022841 - Regulating Thermostat • Small, Flathead Screwdriver • Pliers FS140140 REV: ORIG...
- Page 2 MODEL 520 HEATING ELEMENT REPLACEMENT 0022824SK Remove (3) panel screws from inside Remove support rack from the Remove oven door by opening the of the oven. Once completed, flip the inside of the oven by lifting the door all the way, lifting up to sepa- unit over.
- Page 3 MODEL 520 HEATING ELEMENT REPLACEMENT 0022824SK Remove (2) screws that attach the vent to Remove (2) screws connected to Remove (20) screws from the bottom the base of the heating element. the oven; remove the vent. of the oven & (4) screws from the back of the oven (located by the ar- rows).
- Page 4 MODEL 520 HEATING ELEMENT REPLACEMENT 0022824SK Remove (2) nuts and (3) screws holding the heating element in place; remove the heating element. Using the new element, complete all steps in reverse order and you have successfully replaced your units heating element. Your unit is now ready for operation.