Advertisement
Quick Links
DESCRIPTION
This document illustrates how to replace the LED Assemblies for models 791 & 891.
-For replacement of the side LED, continue to page 2.
-To replace the top LED, continue to page 4.
TOOLS NEEDED
•
#2 Phillips Screwdriver (Stubby
Recommended)
•
7 mm Socket Wrench or Driver
FS140147 REV: ORIG
7-27-2020
LED ASSEMBLY REPLACEMENT
0027265SK & 0027266SK
PARTS INCLUDED
•
(1) 0027265 - 6" LED Assembly (791 Top)
OR
•
(1) 0027266 - 12" LED Assembly (891 Top
& 791/891 Side)
MODEL 791/891
Page 1 of 5
Advertisement
Related Manuals for Wisco Industries 791
Summary of Contents for Wisco Industries 791
- Page 1 MODEL 791/891 LED ASSEMBLY REPLACEMENT 0027265SK & 0027266SK DESCRIPTION This document illustrates how to replace the LED Assemblies for models 791 & 891. -For replacement of the side LED, continue to page 2. -To replace the top LED, continue to page 4. TOOLS NEEDED PARTS INCLUDED • #2 Phillips Screwdriver (Stubby • (1) 0027265 - 6” LED Assembly (791 Top) Recommended) •...
- Page 2 MODEL 791/891 LED ASSEMBLY REPLACEMENT 0027265SK & 0027266SK Side LED Assembly Replacement (Model 891 used in images) Unplug the LED assembly from the power board. Remove the racks from inside of the unit and then place the unit on its side. Remove (9) screws and remove the bottom From a rear view of the unit, the: panel.
- Page 3 MODEL 791/891 LED ASSEMBLY REPLACEMENT 0027265SK & 0027266SK Flip the unit back into an upright Remove the LED assembly/rack Using the new LED assembly, position. Using the 7 mm socket holder. Remove (2) nuts that hold complete all steps in reverse...
- Page 4 Remove (4) screws from the inside-top of Remove (2) nuts that holds the blower the unit. motor in place; Remove the blower 791: Remove (6) screws from the top panel. motor assembly. 891: Remove (7) screws. Remove the top panel.
- Page 5 (6” strip for the 791 or 12” for the 891) LED assembly. Your unit is now ready for operation. FS140147 REV: ORIG...