Smeg DI322BQLH Translation Of The Original Instructions page 17

Installation
2.4 Electrical connection and precautions
Check that the voltage and the frequency of the
mains match the ratings on the name plate of
the appliance positioned on the inner edge of
the door.
The plug on the supply cord and the
corresponding socket outlet must be of the
same type and meet the regulations in force.
The plug must be accessible after installation.
Never disconnect the plug by pulling on the
power supply lead.
After changing the supply cord, make sure that
the bracket which secures the cord is fixed
securely in place.
Do not use adaptors or shunt connections
in order to avoid the possibility of overheating
or burning.
In the event of damage to the supply cord,
have it replaced by the manufacturer or an
Authorized Technical Service Centre in
order to avoid any risk.
17