Table of Contents
Advertisement
NEVER lift the trowel to unnecessary heights. DO NOT
stand underneath the trowel while it is being lifted. Serious
damage to the machine or personal injury could be caused
by dropping a trowel.
Starting the Engine
1. Place the engine fuel valve lever (Figure 20) in the
"ON" position.
Figure 20. Engine Fuel Valve Lever (ON)
2. Pull the throttle lever (Figure 21) slightly backwards and
place in the "IDLE" position.
IDLE
THROTTLE
LEVER
Figure 21. Throttle (Idle Position)
PAGE 22 — BS46H SERIES WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #3 (06/02/16)
3. Place the centrifugal safety "STOP" switch
(Figure 22) in the "ON" position.
OFF
ON
CENTRIFUGAL
SAFETY "STOP"
SWITCH
Figure 22. Centrifugal Safety"Stop"
Switch (ON)
CAUTION
NEVER disable or disconnect the centrifugal safety
"STOP" switch. It is provided for the operator's safety
and injury may result if it is disabled, disconnected or
improperly maintained.
4. Place the choke lever (Figure 23) in the "OPEN"
position.
Figure 23. Choke Lever Open
OPERATION
Advertisement
Table of Contents
