AEG SDS51400S1 User Manual page 33

8. Remove the correct part from the
hinge cover (E). Make sure to remove
the part DX, in the case of right
hinge, SX in opposite case.
9. Attach the covers (C, D) to the lugs
and the hinge holes.
C
D
E
B
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the
hinge.
I
I
E
12. Connect the appliance laterally to
the kitchen furniture sidewall.
13. Loosen the screws of the part (G) and
move the part (G) till the furniture
sidewall.
14. Tighten the screws.
15. Attach the part (H) to the part (G).
16. Disconnect the parts (Ha), (Hb), (Hc)
and (Hd).
Hb
Hd
17. Install the part (Ha) on the inner side
of the kitchen furniture.
ca. 50 mm
ca. 50 mm
18. Push the part (Hc) on the part (Ha).
ENGLISH 33
G
H
G
Ha
Hc
90°
21 mm
90°
21 mm