AEG SDS51400S1 User Manual page 31

current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
9.3 Ventilation requirements
The airflow behind the appliance must
be sufficient.
min.
5 cm
2
200 cm
CAUTION!
Refer to the assembly
instructions for the
installation.
9.4 Door reversibility
1. Loosen and remove the upper pin
and the spacer.
2. Remove the upper door.
3. Loosen the middle hinge.
4. Remove the door.
5. Remove the lower spacer.
6. Loosen the lower pin with a key.
7. Tighten the lower pin on the
min.
2
200 cm
8. Install the lower spacer.
9. Install the door.
10. Tighten the spacer and the upper
opposite side.
pin.
ENGLISH 31